Home > Xbox 360 > Error 0102 After Reflow

Error 0102 After Reflow

Contents

With the modified fans and fan shroud, it was just a touch warm and stayed like that for most of the 6-hour stress test. Melde dich bei YouTube an, damit dein Feedback gezählt wird. Tin foil isnt enough isolation for a REAL reflow. Heatgun/Griddle will repair these if you know what you are doing. my review here

its a gud guide.yea im going to try again. bigalscot on 2010-01-23 22:26:43 : v killrhedake on 2010-01-16 05:25:13 : Replace thermal paste. 98% of the time, that is the problem. and go from there.Airflow rate makes a huge difference and varies between stations, another reason to just give it to a pro/specialist. CactusComics on 2011-09-09 09:45:38 : okay, i have this error, but i dont know how to fix it.

Xbox 360 Error Code 0102

Go ahead don't spend the one-off 50 or so dollars and get a warranty, waste it on tools etc.. Ace08-12-2010, 01:15 AMBump for an update. You can change this preference below.

Then take a heatgun set it to ~350 and heat the bottom side of the board for 2.5 to 3 minutes. If you're going to insulate, put some kind of non-conducting foam type material down first. Last edited: Oct 8, 2010 leerage, Oct 8, 2010 #7 w00ly Regular member Joined: Dec 7, 2009 Messages: 674 Likes Received: 0 Trophy Points: 26 BIFF0 said: Followed w00lys tutorial before 0102 Country Code I don't suppose I can just replace the caps with ones from another 360?

Also, not using a preheater will guarantee that the board will warp like a potato chip. Error Code 0102 Powerdvd I was able to finish my science project!!!!!

My papa was born in Germany I think. I know it's probably not worth the trouble but I am in Ireland and it's an ntsc 360 so it's more valuable to me than a pal. http://www.se7ensins.com/forums/threads/definitive-way-to-fix-3rrod-secondary-error-0102.345637/ One of the heatsinks are touching their chip.

Checking your browser before accessing team-xecuter.com. Xbox 360 Error Codes but it keeps coming back, does anybody know what i'm doing wrong?? still RROD. All rights reserved.

Error Code 0102 Powerdvd

On Monday, I'm gonna go back to the store and let her know that the repair was a success. Had a reballed GPU Xenon come back to me. Xbox 360 Error Code 0102 its hardware failure.hmm, but it's not a ring, it's 3/4 of a ring. Xbox 360 Reball IE if you had a memory error and performed a reflow but this damaged something with the GPU then the error it would display would be relating to the GPU and

Details for Error code E18/0102 Cold solderjoint - CPU/GPU/RAM Add / Edit Details Primary Error code: 3 RLOD E-Code / Secondary Error code:E18 (No Audio/Video) / 0102 Binary/Hex:00010010 / 0x12 -> this page Edited by kiwimods, 08 November 2009 - 07:04 AM. And like you, I can't do anything on either computer, otherwise the NAND dump will be full of errors. TKO AbonnierenAbonniertAbo beenden107107 Wird geladen... 0102 Area Code

  1. By sensing the temperature with K-type thermocouple and using preprogrammed reflow BGA profile the reflow process is simpler and the result is more consistent.

    how long to fix the xbox 360

    As for
  2. if this still!
  3. Yes, it may work, but in the long run, you will destroy the GPU.
  4. pure3d2, Nov 9, 2010 pure3d2, Nov 9, 2010 #8 (You must log in or sign up to reply here.) Show Ignored Content Log in with Facebook Log in with Twitter Log
  5. the thing is, that the overheat happens only when the system goes past 85C (185F), and the PCB will flex earlier than that, and its the flexing of the PCB that

Schließen Ja, ich möchte sie behalten Rückgängig machen Schließen Dieses Video ist nicht verfügbar. Trust me: my soldering iron was struggling to melt the solder on an empty solder pad to redo the connection to the 12V fan mod applied to my Xbox 360 with I know for a fact that on Xenon and Zephyr motherboards, the 12V fan mod is pretty much a necessity as those have the hottest-running GPUs. get redirected here BIFF0, Oct 9, 2010 #9 coorva Regular member Joined: Apr 17, 2005 Messages: 1,239 Likes Received: 0 Trophy Points: 46 when i used the heat gun way back when,,,i didnt use

I don't know if the mode of my LPT port has anything to do with it(it's set to SPP mode). P0102 Happy hacking :cool: Powered by vBulletin Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. I know it's probably not worth the trouble but I am in Ireland and it's an ntsc 360 so it's more valuable to me than a pal.Click to expand...

The motherboard MUST be as flat as possible while you heat it. -Let that cool for 15 minutes.

This technique lasted me about 6 months, I had to do it again last month, so probably not permanent but it'll be good for a while. Bitte versuche es später erneut. Also Griff, a hair dryer is now going to help. So afterthat i make a paper trik (spliting vent) and play sexbox with open tray and home fans blows direct on gpu n cpu.

My xbox is about 3+ years old, had one 2-ring problem (which was fixed with the x-clamp replacement). And this was with the soldering iron set to 430 degrees Celsius. Took it apart scraped off old thermal paste cleaned put new artic silver and thanks to tomi_the_great unplugged fans let run till 2 red lights, cooled down and booted right up useful reference The motherboard is currently cooling off.

I have yet to have one of these that I couldnt fix u60n0 on 2010-04-03 23:28:26 : Here you can enter your comment... Stay logged in AfterDawn Discussion Forums Home Forums > Consoles > Xbox 360 > Xbox 360 - Modding & Hacking > Home Forums Forums Quick Links Search Forums Recent Posts Members That will solve a lot of minor problems (like random E79, odd lights on the RoL and problems with the Play and Charge cable). the GPU will nto reach the solder melting point, it will die before ever getting that far.

Board must not be moved or shook or you'll end up with a bunch of tiny caps all over the board effectively bricking the machine. JYP666 on 2013-04-01 16:28:11 : 0102 on a Xenon board. There are two theories to fixing this one deals with the "X" clamps that hold down the chips. I generally put a paper betweeen the heatsink and GPU surrounding to prevent shorts which will happen if you tighten too much.

I've done the diagnostics already to see what the console suffers from: the Red Ring of Death(3 red lights) with error code 0102, meaning GPU failure. Yeah you can solder out the bad cap and solder in a new one. you open your xbox 360 and check the solder connections resolder it on anyway (heatgun it if you want) check connections again, check the etching. kool kitty8906-19-2010, 10:02 PMOne thing I wonder is why some consoles successfully shut down when detecting overheating and preventing a catastrophic failure (2-bar red ring) and others don't.

This system still has the old dashboard, which means it's fully vulnerable to the JTAG exploit, and it's something I've been wanting to try for a good bit, but both my Ace08-14-2010, 11:38 AMI was getting 2 red lights after about 5 minutes on this Zephyr Xbox 360 with error code 0013(overheating RAM), and I was never really able to get rid Reflowed CPU and the xbox is now stable. I found out that this is related to the RAM chips.I should first mention that he bought it used and when I opened it up, there was a really bad (and

It works everytime. The other ones are Torx-10s. I would rather go for the heatgun method myself. gammmmes on 2012-03-17 09:39:55 : replaced capacitor c9e3 and fixed a recurring issue ..